Ofm 150-DK User Manual download pdf

Assembly Instructions

Tools Needed: Phillips Head Screwdriver

Please read all instructions before assembly.

Step 1:

If you are assembling a model with a DK Foot Ring please proceed

to subsequent pages for drafting kit assembly instructions.

Insert Casters (A) into Base (B).

Step 2: Insert Gas Lift (C) into Base (B).

Step 3: Cover Gas Lift (C) with 3 piece Telescopic Bellows (D).

Step 4: Place Chair Seat (E) on a level, non-abrasive surface

and align pre-drilled holes in Seat Mechanism (F),

with holes in Chair Seat.

Step 5:

If you are assembling a model with optional Adjustable Arms please

proceed to subsequent pages for armrest assembly instructions.

Step 6: Carefully place Chair Seat (E) with attached Seat

Mechanism (F) onto the Gas Lift (C), aligning the

hole in the Seat Mechanism with the Gas Lift.

Press down on Chair Seat to secure onto Base.

Step 7: Slide Seat Bar ( I ) (end with pre-drilled hole), under

Chair Seat (E) and into the slot on Seat Mechanism (F).

Step 8:

Place Washer (G and K) on threaded end of Back Depth

Adjustment (J), and insert into slot on Seat Mechanism (F),

and into pre-drilled hole in Seat Back Bar ( I ),

hand tighten

Step 9: Carefully sit on chair to make sure the Gas Lift (C)

is properly inserted into the Base (B).

Step 10: Operate the Gas Lift Lever on the Seat Mechanism (F)

to be sure unit is working properly.

Step 11: Re-adjust Back Depth Adjustment (J) accordingly,

for your personal comfort.

STOP

Insert the four 19mm Screws (H) through the holes in

the Seat Mechanism (F), and into the Chair Seat (E).

Tighten with screwdriver

to hold in place.

19mm Screw

4 pcs.

Toothed Washer

1 pc.

Caster

5 pcs.

Base

1 pc.

Gas Lift

1 pc.

Telescopic

Bellows

1 pc.

Back Depth

Adjustment

1 pc.

Seat Mechanism

1 pc.

Chair Back

and Bar

1 pc.

Parts Listing

Flat Washer

1 pc.

Chair Seat

1 pc.

Assembly Notes:

During assembly, hand tighten screw only when all screws

are in place, you may then tighten all screws completely.

CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose screws and tighten them every 6 months.

Model 150 / 150-AA / 150-DK / 150-AA-DK Lite Use Computer Task Chair

WEIGHT CAPACITY: 250 lbs.

07.07.2014

161 Tradition Trail, Holly Springs, NC, 27540

800-520-7471 (voice) 919-362-4765 (fax)

919-303-6389 (voice) www.ofminc.com

[email protected]

1 2 3

Summary of Contents

Page 1 - Lite Use Computer Task Chair

Assembly InstructionsTools Needed: Phillips Head ScrewdriverPlease read all instructions before assembly.Step 1: If you are assembling a model with a

Page 2 - Model AA-1 Adjustable Arms

Assembly Notes: During assembly, hand tighten screws. Only when all screws are in place, you may then tighten all screws completely.CAUTION:1. Do not

Page 3 - Drafting Kit Assembly

Gas LiftChair SeatChair BaseAC / DBModel DK-2 Drafting Kit AssemblySTOPAssembly InstructionsPlease read all instructions before assembly.Prior to ass

Related models: 150-AA-DK | 150-AA | 150 |

Comments to this Manuals

No comments

Ofm 150-DK User Manual

Browse online or download User Manual for Furniture Ofm 150-DK. OFM 150-DK User Manual

Summary of Contents

Related models: 150-AA-DK | 150-AA | 150 |

Comments to this Manuals

Related products and manuals for Furniture Ofm 150-DK